Tigers List Archive

This read-only message was archived from a public mail list.
Mail From: Ray McCrary <(email redacted)>

From: Ray McCrary <(email redacted)>
>Subject: Ford and Volvo fans
>
>Hello,
>
>Does anyone have a part number or application for the Ford and Volvo fans
that were the subject of a thread that ran a few weeks ago?
>
>Help will be appreciated....
>
>Regards,
>Ray

This read-only message was archived from a public mail list.
Mail From: "John Crawley" <(email redacted)>

Hi Ray:

The Volvo fan O.D. seems to be 14 1/4 when measured with my carpenter's
tape. The center hole is 1 3/16.
The part no is Volvo 683541 IMP 69 34.
The four locating holes line up with the TIGER pump and I have successful
used them for centering the fan but a better
install is to use the Volvo aluminum spacer turned down to 1/4 in thickness
as this will give exact centering.

Godspeed
Jc

This read-only message was archived from a public mail list.
Mail From: "Allan Connell" <(email redacted)>

Forgot to respond to Ray's message regarding the FORD fan. It is stamped
with the following: CF-09DE-A. Six Aluminum blades riveted to a steel hub.
Will require trimming to fit the rack and depending on your water pump, some
modification to the hub hole.

Allan
B9472373

-----Original Message-----
From: (email redacted) [mailtoemail redacted)] On
Behalf Of John Crawley
Sent: Wednesday, September 02, 1998 3:19 PM
To: Ray McCrary
Cc: (email redacted)
Subject: Re: Ford and Volvo fans

Hi Ray:

The Volvo fan O.D. seems to be 14 1/4 when measured with my carpenter's
tape. The center hole is 1 3/16.
The part no is Volvo 683541 IMP 69 34.
The four locating holes line up with the TIGER pump and I have successful
used them for centering the fan but a better
install is to use the Volvo aluminum spacer turned down to 1/4 in thickness
as this will give exact centering.

Godspeed
Jc