Tigers List Archive
Dana 44 Bearings and seal numbers
Posted by mailbot
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Nov 18, 2008 12:03 PM
Joined 15 years ago
68,271 Posts
|
This read-only message was archived from a public mail list.
Mail From: "Fabbro" <(email redacted)>
Hi All'
The 1965 Tiger I am working on has a Dana 44 rear end with 3.72 gears
in it. I plan to replace them with some thing in the lower 3 range. It
has a good posi unit in it. I plan to purchase new bearings and seals
for the rear end housing. Can any one that has done this forward some
bearing and seal numbers my way so I can orders them from one of my
suppliers. I like to take it apart, clean it up and assemble all in one
day with no running for parts.
Thanks
Kim
_______________________________________________
Support Team.Net team.net/donate.html
(email redacted)
autox.team.net/mailman/listinfo/tigers
team.net/archive
Mail From: "Fabbro" <(email redacted)>
Hi All'
The 1965 Tiger I am working on has a Dana 44 rear end with 3.72 gears
in it. I plan to replace them with some thing in the lower 3 range. It
has a good posi unit in it. I plan to purchase new bearings and seals
for the rear end housing. Can any one that has done this forward some
bearing and seal numbers my way so I can orders them from one of my
suppliers. I like to take it apart, clean it up and assemble all in one
day with no running for parts.
Thanks
Kim
_______________________________________________
Support Team.Net team.net/donate.html
(email redacted)
autox.team.net/mailman/listinfo/tigers
team.net/archive
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Nov 18, 2008 03:36 PM
Joined 15 years ago
68,271 Posts
|
This read-only message was archived from a public mail list.
Mail From: " Ron Fraser" <(email redacted)>
Kim
TigersUnited web site has a parts manual with Dana part numbers
listed.
tigersunited.com/resources/parts_rs260/Parts_List/9-NF-RearAndRoa
dWheels.pdf
I have a note in mine that has a NO next to the Timken number so I'm not
sure there.
Sunbeam Specialties has the parts listed and I'm sure Classic Sunbeam has
them too.
Ron Fraser
-----Original Message-----
From: (email redacted) [mailto
email redacted)]
On Behalf Of Fabbro
Sent: Tuesday, November 18, 2008 1:04 PM
To: (email redacted)
Subject: [Tigers] Dana 44 Bearings and seal numbers
Hi All'
The 1965 Tiger I am working on has a Dana 44 rear end with 3.72 gears in
it. I plan to replace them with some thing in the lower 3 range. It has a
good posi unit in it. I plan to purchase new bearings and seals for the rear
end housing. Can any one that has done this forward some bearing and seal
numbers my way so I can orders them from one of my suppliers. I like to take
it apart, clean it up and assemble all in one day with no running for parts.
Thanks
Kim
No virus found in this incoming message.
Checked by AVG - avg.com
Version: 8.0.175 / Virus Database: 270.9.6/1797 - Release Date: 11/18/2008
11:23 AM
_______________________________________________
Support Team.Net team.net/donate.html
(email redacted)
autox.team.net/mailman/listinfo/tigers
team.net/archive
Mail From: " Ron Fraser" <(email redacted)>
Kim
TigersUnited web site has a parts manual with Dana part numbers
listed.
tigersunited.com/resources/parts_rs260/Parts_List/9-NF-RearAndRoa
dWheels.pdf
I have a note in mine that has a NO next to the Timken number so I'm not
sure there.
Sunbeam Specialties has the parts listed and I'm sure Classic Sunbeam has
them too.
Ron Fraser
-----Original Message-----
From: (email redacted) [mailto
email redacted)]On Behalf Of Fabbro
Sent: Tuesday, November 18, 2008 1:04 PM
To: (email redacted)
Subject: [Tigers] Dana 44 Bearings and seal numbers
Hi All'
The 1965 Tiger I am working on has a Dana 44 rear end with 3.72 gears in
it. I plan to replace them with some thing in the lower 3 range. It has a
good posi unit in it. I plan to purchase new bearings and seals for the rear
end housing. Can any one that has done this forward some bearing and seal
numbers my way so I can orders them from one of my suppliers. I like to take
it apart, clean it up and assemble all in one day with no running for parts.
Thanks
Kim
No virus found in this incoming message.
Checked by AVG - avg.com
Version: 8.0.175 / Virus Database: 270.9.6/1797 - Release Date: 11/18/2008
11:23 AM
_______________________________________________
Support Team.Net team.net/donate.html
(email redacted)
autox.team.net/mailman/listinfo/tigers
team.net/archive
Sorry, you can't reply to this topic. It has been closed.
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.








